Default Settings for Event Centre Crestron System

The following images are of the required settings for the system to produce sound using the Podium Microphone or any of the Handheld Wireless Microphones as well as the rack mounted PC.

1. Touch the Projection button and then Turn On both projectors (if both are needed), to lower the screens press the Screen button twice for each projector.

   Open

   

2. The Audio Sources need to be set to two different sources otherwise there will be a doubling in the room audio. If you’re using the Podium HDMI or Apple TV, switch the right hand source audio accordingly.

   Open

   

3. The Zone Audio Controls in the next three images are preset, if you notice anything has changed from these photos, please slide the sliders back to their default positions.

   Open

   
   Open

   
   Open

   

4. By default the Master Volume – All Zones is Muted

   Open

   

5. Touch the MUTE ALL button in order to unmute the system and hear audio from any source

   Open

   

6. To power off the entire system, shutdown the PC as normal and then touch the System Off button in the lower right of the touch panel, then say YES to shut all systems off

   Open

   

*Here’s a printable copy of the information above: