Completing LTCMR-0120 and LTCMR-0130 (PointClickCare Modules)

There are two micro-credentials that teach learners how to use the PointClickCare software. Depending on your staff role, you may have to take one or both of these modules:

LTCMR-0120 - Navigate the PointClickCare System in the Care Environment
LTCMR-0130 - Use the Point of Care Documentation Module of PointClickCare System in Long-Term Care

Preferred Browser & Device

Google Chrome is the preferred browser and the PointClickCare modules should be accessed from a laptop or desktop computer - not a mobile device. Using a different browser, or attempting to complete the modules on a mobile device, can result in errors that will prevent successful completion of the modules.

Instructions

If you are experiencing issues completing either LTCMR-0120 or LTCMR-0130, please follow the instructions below.

IMPORTANT NOTE: When navigating the PointClickCare modules DO NOT use the navigation arrows highlighted in red below. These navigation arrows move you back to the previous module or forward to the next module, which can result in your progress being lost.

Be sure to only use the PREV and NEXT navigation buttons highlighted in green below.

If the NEXT button is not displayed, it means there is something you need to complete on the current slide before advancing to the next one.

PLEASE NOTE: the screenshots in this section are taken from Part 1 of LTCMR-0120. If you are completing Part 2 or 3, the screens will look slightly different, but the process for completing each module is the same.

After you have completed the last one of the simulations in a module, the Next button will appear in the bottom right-hand corner. Select Next to move to the Module Completion slide.

As shown in the screenshot below, the button for the last simulation you complete may not turn grey after you complete it. Once the Next button appears, you are ready to move on to the next slide, even if the final button has not turned from blue to grey.

Select Complete Module

Select Continue - the module will now be marked as complete in the Grades tab and you will be able to access the next module.

Select Exit Module to continue to Part 2 of the micro-credential. There are 3 parts to this micro-credential. You must complete all three parts to receive a Pass grade.

Please follow the steps shown in the video below to complete Part 1 of LTCMR-0130 so that you completion is recorded in the Grades tab.

You can check your final grade for a micro-credential in the Grades tab. Your grade will show NP (No Pass) by default until you have successfully completed the micro-credential. If you do not see a Pass grade in the Grades tab, you have not yet achieved a Pass grade for that micro-credential.

The Grades tab is located in the navigation bar at the top of the screen.

If you have achieved a Pass grade, you will see a P highlighted green under Grade. If you have not yet achieved a Pass grade you will see an NP highlighted red as shown below.

Contact

If you experience any issues with LTCMR-0120 or LTCMR-0130 after following these instructions, reach out to our portal team at carepassporthelp@lambtoncollege.ca.