Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Next »

If you are experiencing issues completing either of the following Care Passport micro-credentials, please follow the instructions below:

  • LTCMR-0120 Navigate the PointClickCare System in The Care Environment

  • LTCMR-0130 Use the Point of Care Documentation Module of PointClickCare System in Long- Term Care

Be sure to use the Google Chrome browser on a laptop or desktop computer when doing the PointClickCare modules. Using a different browser, or attempting to complete the modules on a mobile device, can result in errors that will prevent successful completion of the modules.

Instructions

Select the arrow symbol > for the set of instructions you need. An accordion box will open to display the instructions.

 READ THIS FIRST - Navigation Buttons

IMPORTANT NOTE: When navigating the PointClickCare modules DO NOT use the navigation arrows highlighted in red below. These navigation arrows move you back to the previous module or forward to the next module, which can result in your progress being lost.

Be sure to only use the PREV and NEXT navigation buttons highlighted in green below.

If the NEXT button is not displayed, it means there is something you need to complete on the current slide before advancing to the next one.

 LTCMR-0120 Navigate the PointClickCare System in The Care Environment

PLEASE NOTE: the screenshots in this section are taken from Part 1 of LTCMR-0120 Navigate the PointClickCare System in The Care Environment. If you are completing Part 2 or 3, the screens will look slightly different, but the process for completing each module is the same.

After you have completed the last one of the simulations in a module, the Next button will appear in the bottom right-hand corner. Select Next to move to the Module Completion slide.

As shown in the screenshot below, the button for the last simulation you complete may not turn grey after you complete it. Once the Next button appears, you are ready to move on to the next slide, even if the final button has not turned from blue to grey.

Select Complete Module

Select Continue - the module will now be marked as complete in the Grades tab and you will be able to access the next module.

Select Exit Module to continue to Part 2 of the micro-credential. There are 3 parts to this micro-credential. You must complete all three parts to receive a Pass grade.

 LTCMR-0130 Use the Point of Care Documentation Module of PointClickCare System in Long-Term Care

Please follow the steps shown in the video below to complete Part 1 of LTCMR-0130 so that you completion is recorded in the Grades tab.

PointClickCare Training - Part 1 - LTCMR-0120 PointClickCare System-MS - Google Chrome 2023-11-22 16-41-16.mp4
 MAKE SURE YOU'VE PASSED - Check Your Grade in the Grades Tab

You can check your final grade for a micro-credential in the Grades tab. Your grade will show NP (No Pass) by default until you have successfully completed the micro-credential. If you do not see a Pass grade in the Grades tab, you have not yet achieved a Pass grade for that micro-credential.

The Grades tab is located in the navigation bar at the top of the screen.

Grades tab - student view.png

If you have achieved a Pass grade, you will see a P highlighted green under Grade. If you have not yet achieved a Pass grade you will see an NP highlighted red as shown below.

No Pass Grade - student view.png

Contact

If you experience any issues with LTCMR-0120 or LTCMR-0130 after following these instructions, please contact us at CarePassportHelp@lambtoncollege.ca.

  • No labels