Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Use this document to set up ImagePrint on your Mac, enabling you to print wirelessly to the Photography Lab Epson printers and simultaneously utilize ImagePrint color/print optimization.

\uD83D\uDCD8 Instructions

  1. Visit https://www.colorbytesoftware.com/print-black.shtml and click the “Download for Mac” button

    image-20240129-170149.png
  2. Run the .pkg file you downloaded.

    IMagPrint 1.png
  3. Click “Allow” to begin the installation.

    IMagePrint 2.png

  4. Click “Continue”

    ImagePrint 3.png

  5. Click “Continue”

    ImagePrint 4.png

  6. Click “Install”

    ImagePrint 6.png
  7. Click “Agree” to accept the license agreement. You must agree in order to use the software.

    IMagePrint 5.png

  8. Verify you have the required amount of disk space available, then click “Install”

    ImagePrint 6.png

  9. Click “Launch IPSetup” to begin adding printers to the software. You can also do this later by running the “IPSetup” program in Applications > ImagePrint.

    IMagePrint 7.png

  10. Click “Add Printer”. Disregard the “No dongle attached” message, you will not need a dongle or any license information.

    IMagePrint 8.png

  11. Click “Continue”

    IMagePrint 9.png

  12. Check the “I don’t have a license code, I want to run Demo Mode” box and click “Continue”.

    ImagePrint 10.png


  13. Select the “Black” radio button and click “Continue”.

    ImagePrint 11.png

  14. Select the model of printer you’re adding and click “Continue”. We have SureColor P800 and SureColor P900 models currently in use. The printers in the back of the lab are labelled with their model and name on the server for reference as needed.

    imageprint 13.png
  15. Enter the name of the printer. The name you enter must match the label on the printer exactly to ensure your jobs go to the correct device when you send them. Choose the “No (Remote Client computer) radio button. Click “Continue”.

    imageprint 15.png
  16. Enter “10.0.13.29” for the IP address when prompted here and click “Done”.

    imageprint 16.png

  17. Click “Close” to complete the installation. If you want to add additional printers, you can run IPSetup from Applications > ImagePrint and go through the above steps again for each additional printer.

    imageprint 17.png








Highlight important information in a panel like this one. To edit this panel's color or style, select one of the options in the menu.

Filter by label

There are no items with the selected labels at this time.

  • No labels