Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

This is a secure wireless connection (SSID) that will have access to additional resources onsite such as Colleague, network drive (J:\, M:\), etc

Users log in with their college username and password.  Generally, this prompts when you connect to the SSID.  However, connecting to lambtonsecure using Win7 or Win10 systems requires a few intervening steps, unlike MAC and Phone platforms. The following step-by-step is shown with Win10 Enterprise edition. Other versions/releases of Windows will be similar.

Step-by-step guide

  1. Open Control Panel/Network and Internet/Network and Sharing Center
  2. Select "Set up a new Connection or network"
  4. Select "Manually connect to a wireless network"
  6. Enter the information for the new network, selecting or de-selecting the appropriate check-boxes, as pictured below.
  8. Select "Change connection settings"
  10. Click the "Security" tab appearing next. De-select "Remember my credentials for this connection..."
  11. Select the "Settings" tab on the same page.
  12. De-select "Verify the server's identity..." and select "Enable Fast Reconnect"
  14. Click the "Configure" button to the right of this option.
  15. De-select "Automatically use my Windows login name..." and click OK.
  17. Click OK on the next screen (the previous one, of step 12.
  18. Click the "Advanced Settings" tab, and on the "802.1X settings" page, select "Specify authentication mode". Then use the drop-down to select "User authentication".
  20. Click OK, then OK, then close.
  21. You should now be able to connect to the lambtonsecure SSID. You will be prompted for your login credentials and these will be your AD account, c0# etc.




  • No labels