Page Comparison

This is a secure wireless connection (SSID) that will have access to additional resources onsite. College staff are encouraged to always connect to lambtonsecure as opposed to the lambtonwireless network.

Users log in with their College username and password. Generally, this prompts when you connect to the SSID. However, connecting to lambtonsecure using Windows requires a few additional steps, unlike MacOS, iPhone, iPads, or Android devices.

The following step-by-step is shown with Windows 10 Enterprise edition. Other versions of Windows will be similar.

Step-by-step guide

Open Control Panel > Network and Internet > Network and Sharing Center
Select Set up a new Connection or network
Image Modified
Select Manually connect to a wireless network
Image Modified
Enter the information for the new network, selecting or de-selecting the appropriate check-boxes, as pictured below.
Image Modified
Select Change connection settings

Image Modified
Click the Security tab appearing next. De-select Remember my credentials for this connection...
Select the Settings tab on the same page.
De-select Verify the server's identity... and select Enable Fast Reconnect
Image Modified
Click the Configure button to the right of this option.
De-select Automatically use my Windows login name... and click OK.

Image Modified
Click OK on the next screen
Click the Advanced Settings tab, and on the 802.1X settings page, select Specify authentication mode. Then use the drop-down to select User authentication.

Image Modified
Click OK, then OK, then close.
You should now be able to connect to the lambtonsecure SSID. You will be prompted for your login credentials and these will be your AD account, c0# etc.