Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

This is a secure wireless connection (SSID) that will have access to additional resources onsite such as Colleague, network drive (J:\, M:\), etc.  College staff are encouraged to always connect to lambtonsecure as opposed to the lambtonwireless network.

Users log in with their college College username and password.  Generally, this prompts when you connect to the SSID.  However, connecting to lambtonsecure using Win7 or Win10 systems Windows requires a few intervening additional steps, unlike MAC and Phone platforms. MacOS, iPhone, iPads, or Android devices. 

The following step-by-step is shown with Win10 Windows 10 Enterprise edition. Other versions /releases of Windows will be similar.

Step-by-step guide

  1. Open Control Panel

...

  1. > Network and Internet

...

  1. > Network and Sharing Center

  2. Select

...

  1. Set up a new Connection or network

...



  1. Image Modified

  2. Select

...

  1. Manually connect to a wireless network

...



  1. Image Modified

  2. Enter the information for the new network, selecting or de-selecting the appropriate check-boxes, as pictured below.

    Image Modified

  3. Select

...

  1. Change connection settings

...



  1. Image Modified

  2. Click the

...

  1. Security

...

  1.  tab appearing next. De-select

...

  1. Remember my credentials for this connection...

...



  1. Select the

...

  1. Settings

...

  1.  tab on the same page.

  2. De-select

...

  1. Verify the server's identity...

...

  1.  and select

...

  1. Enable Fast Reconnect

...



  1. Image Modified

  2. Click the

...

  1. Configure

...

  1.  button to the right of this option.

  2. De-select

...

  1. Automatically use my Windows login name...

...

  1.  and click OK.

    Image Modified

  2. Click OK on the next screen

...



  1. Click the

...

  1. Advanced Settings

...

  1.  tab, and on the

...

  1. 802.1X settings

...

  1.  page, select

...

  1. Specify authentication mode

...

  1. . Then use the drop-down to select

...

  1. User authentication

...

  1. .

    Image Modified

  2. Click OK, then OK, then close.

  3. You should now be able to connect to the lambtonsecure SSID. You will be prompted for your login credentials and these will be your AD account, c0# etc.

If you run into any issues, please don't hesitate to reach out to the IT Service Desk.

Filter by label (Content by label)
showLabelsfalse
max5
spacesICD
showSpacefalse
sortmodified
reversetrue
typepage
cqllabel in ("setup","wireless","connection") and type = "page" and space = "ICD"
labelswireless setup connection

...

Page Properties
hiddentrue


Related issues