...
Confirm whether you are using Final Calculated Grades or Final Adjusted Grades.
If you’re not sure, check your Enter Grades screen. The column with the Ø symbol is the method you’re using.
Confirm that you are using the correct Grade Scheme for the course that you are teaching.
Most courses will use the Lambton Grade Scheme (students receive a letter grade e.g. A+, A, B+, C).
If you are teaching a course with a Pass/No Pass Grade Scheme, you will need to select the appropriate grade scheme.
If you are teaching in the BScN program, you will use the Percentage Grade Scheme.
If you are unsure which grade scheme you should be using, check with your Dean’s office to confirm.
If you need to change the grade scheme, click on Grade > Setup Wizard and follow the steps to set up the appropriate grade scheme.
Verify that your grades have been properly calculated. Instructors should manually calculate the final grade of at least one student and compare it to the Final Grade display for that student in the D2L gradebook. Your grade and the grade in D2L are not the same, you need to determine why they do not match. Contact the Teaching Innovation & Learning Support Services if you need help.
| Info |
|---|
If you see a notification in the Manage Grades tab that the final grade does not sum to 100%, see Does Your Gradebook Total 100% for instructions on how to fix it. |
Releasing Grades
If you are releasing Final Calculated Grades follow these next steps:
...